A.B.S. Flexilo MINI Montage-, Bedienings- en Vulinstructies - Pagina 18

Blader online of download pdf Montage-, Bedienings- en Vulinstructies voor {categorie_naam} A.B.S. Flexilo MINI. A.B.S. Flexilo MINI 19 pagina's. For wood pellets. construction: plug-in system galvanized

Pagina afdrukken

Operating and Assembly Instructions – A.B.S. Flexilo MINI for wood pellets

Final inspection

6 Final Inspection

Position of the extraction device

Check that the discharge neck is centered in the silo. Adjust the silo or extraction unit so that

the silo is centered exactly over the point of discharge.

Use the following check list to ensure proper assembly of the silo.

•

Check that all individual parts are bolted together properly.

•

Check that the top bars and frame legs (stands) are not askew (use a spirit level).

•

Check that the silo bag is suspended centrally.

•

Check that the filling and extraction systems are attached correctly.

•

Check that the nameplate is attached in a clearly visible location on a frame leg or the

filling line.

•

Check the room layout (wall and ceiling clearance, condition of the room, fixtures in the

room, room ventilation).

•

Have the frame earthed by a licensed electrician. The earth resistance must not exceed

106 Ω.

•

Check that the silo frame is anchored to the floor properly.

•

Check the stability of the silo frame overall.

•

Tighten the clamping rings and tension bands on the extraction system once again.

Subject to technical change

Right

RICHTIG

Issue 09/2016

Wrong

FALSCH

Page 18 of 19