Billi 943010 Gebruikershandleiding - Pagina 5
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Billi 943010. Billi 943010 16 pagina's.
Pagina afdrukken
User guide
Billi Sahara & Sahara Plus – XL.
Options & Operation
To operate, simply press the left lever to
dispense boiling water and the right lever
to dispense ambient . When lifted the levers
will latch for continual delivery, until released
with a light press .
Operating modes can be selected by the
user by entering Options Mode .
Within the options mode, you can set the safety
switch through the hot water lever and power
save mode through the cold water lever .
See below for further instructions .
To enter the options mode:
1 . Turn on the unit and wait for normal
operation (icons are both illuminated
constantly) .
2 . Press both the hot and cold levers on
the dispenser. While holding the
two levers down, touch the safety
switch indent at the back of the
dispenser. Hold both levers and the
safety switch until dispenser lights
change colour.
3 . Release both the levers & safety switch.
4 . Within 10 seconds, push and release
the pressure relief button on the unit.
Note: Older models may require this
step to be skipped.
5. Unit is now in options mode .
6 . If you wish to change or set the safety
switch mode, follow the safety switch
settings procedure . If you wish to
change or activate the power saving
mode follow the power save mode
settings procedure .
Safety Switch settings
The
Red
padlock indicates the different safety
settings enabled . To change or activate a
setting once in options mode, press and
release the hot (left) lever to scroll through the
following options;
– Red Icon Off: indicates the hot tap is
disabled .
– Padlock icon on, Red icon on: indicates hot
tap safety switch is enabled
– Red Icon On: indicates normal operation
with safety switch not enabled .
To save new setting and exit Options Mode,
touch the safety switch and release . Wait 10
seconds for unit to return to normal operation
with modified settings .
Power save mode settings
(EcoIntelligence, standby or on 24/7)
The
Green
icons on the tap indicates the
power save level that is selected . To change
or activate a setting once in options mode,
press and release the ambient (right) lever
to scroll through the following options;
– Green leaf on: indicates Eco Intelligence™
self learning timer is enabled .
– Green moon & stars icon flashing:
indicates Standby Mode is enabled .
– White Icon On: indicates system is in
24 hour continuous mode .
To save new setting and exit Options Mode,
press the safety switch and release . Wait 10
seconds for unit to return to normal operation
with new settings .
Holiday mode
To set press the pressure relief valve located
under the unit cover beside the filter housing .
5