DFx Technology InnEnergy Gebruiksaanwijzing - Pagina 8

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} DFx Technology InnEnergy. DFx Technology InnEnergy 16 pagina's.

InnEnergy® device installed (note: the 'After' value will only be displayed when

the InnEnergy® device is in 'Normal Operation' mode). By pressing the 'PF' button

(button 4) the Power Factor (PF) is displayed. By pressing on the 'VA' button (but-

ton 5) the true power that is currently being measured by the InnEnergy® device is

displayed. When the true power is displayed, the 'VA' button changes into the 'W'

button (button 5). By pressing on the 'W' button (button 5), the number of Watts

that are being measured is displayed.

6.5 Voltage/Current Meter

This screen displays the voltage (V) and current (A) being measured by the InnEn-

ergy® device.

7. Engineer Mode

The 'Engineer Mode' is where all user definable parameters are set. To access

the 'Engineer Mode' press the MENU (button 2) button until the 'Engineer Mode'

screen is displayed. Next, press the OK button (button 4). This will display the

'Enter Code' screen (see 7.1).

7.1 Engineering Code

The engineering code prevents unauthorised

access to the settings of the InnEnergy® device.

The default code is 1966. To access the 'Engi-

neer Mode' this code must be entered, when

prompted to do so by the 'Engineering Code'

screen (see 7.). Press the <INC button (button

1) to increment the first digit of the code. To input

the next digit press the SET> button (button 5).

When all four digits have been set, press the SET> button (button 5) once more to

enter the 'Engineer Mode'. If the 'Engineering Code' is correct, access to the 'Engi-

neer Mode' will be granted, if the code is incorrect, the 'Engineer Mode' screen will

be re-displayed and the process of entering the code must be repeated.

7.2 Clock Set (Date/Time/Day)

In 'Engineer Mode' press the MENU (button 2)

until the 'Clock Set' screen is displayed (this

should be the first screen displayed in 'Engineer

Mode'). To set the date, press the OK button (but-

ton 4). The 'Date Set' screen will be displayed.

To increment the highlighted digit press the <INC

button (button 1), then press the SET> button

(button 5) to move to the next digit. Once the date

had been set press the SET> button (button 5)

once more to set the day. The 'Day Set' screen will be displayed. Press the <INC

button (button 1) to display the different days of the week. Once the correct day

has been selected, press the SET> button (button 5) to proceed to the 'Day Light'

set screen. By pressing the <INC button (button 1), the 'Daylight Saving' func-