Abatement Technologies HEPA-AIRE PAS1200 Gebruiksaanwijzing - Pagina 12

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Abatement Technologies HEPA-AIRE PAS1200. Abatement Technologies HEPA-AIRE PAS1200 18 pagina's. Portable air scrubber

Pagina afdrukken

PAS1200 SPECIFICATIONS

FEATURE
Net weight with filters:
Shipping weight:
Unit dimensions:
Power supply requirements:
Normal operating amps:
Integrated circuit breaker:
Motorized impeller:
Operating flow rate* (with clean filters):
Operational sound level:
Cabinet:
Transportability:
Pre-filter access:
First stage pre-filter:
Second stage pre-filter:
Optional third stage pre-filter:
HEPA filter:
Note: Specifications subject to change without notice.
*Airflow rating estimates are based on factory testing at 120 VAC, 60 Hz with an air straightener and a traverse
of readings taken with a computing vane-anemometer. Actual results may vary for various reasons, including
motor and blower and HEPA filter tolerances. Factors such as filter loading, reduced voltage to the motor, and
inlet and outlet ducting will reduce airflow. Use the ratings as a general guideline only.
SPECIFICATIONS
85 lbs.
107 lbs.
19.75" L x 22" W x 39" H
Minimum
120 VAC, 60 Hz, 15 A
3.5 amps or less
10 amps
400 watt motorized impeller with thermal overload protection,
auto re-set, 60 Hz, single phase.
Variable, 300 – 900 CFM
62 – 67 dBA on high speed, reading taken at 5'.
20 gauge stainless steel, assembled with solid rivets. Seams are
gasketed.
2 each 8" rubber wheels in rear and 2 ea. 360° swivel casters in
front
Swing out hinged door secured in place with cam latch.
1" deep coarse particulate pre-filter (P/N: F621).
2" deep pleated particulate pre-filter (P/N: H502).
2" deep high capacity carbon filter for odors (P/N: VL1002).
Tested and certified to an efficiency of 99.97% or higher against
0.3 micron size particles (P/N: H610C-99).
10