- ページ 12

スクラバー Abatement Technologies HEPA-AIRE PAS1200のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Abatement Technologies HEPA-AIRE PAS1200 18 ページ。 Portable air scrubber

PAS1200 SPECIFICATIONS

FEATURE

Net weight with filters:

Shipping weight:

Unit dimensions:

Power supply requirements:

Normal operating amps:

Integrated circuit breaker:

Motorized impeller:

Operating flow rate* (with clean filters):

Operational sound level:

Cabinet:

Transportability:

Pre-filter access:

First stage pre-filter:

Second stage pre-filter:

Optional third stage pre-filter:

HEPA filter:

Note: Specifications subject to change without notice.

*Airflow rating estimates are based on factory testing at 120 VAC, 60 Hz with an air straightener and a traverse

of readings taken with a computing vane-anemometer. Actual results may vary for various reasons, including

motor and blower and HEPA filter tolerances. Factors such as filter loading, reduced voltage to the motor, and

inlet and outlet ducting will reduce airflow. Use the ratings as a general guideline only.

SPECIFICATIONS

85 lbs.

107 lbs.

19.75" L x 22" W x 39" H

Minimum

120 VAC, 60 Hz, 15 A

3.5 amps or less

10 amps

400 watt motorized impeller with thermal overload protection,

auto re-set, 60 Hz, single phase.

Variable, 300 – 900 CFM

62 – 67 dBA on high speed, reading taken at 5'.

20 gauge stainless steel, assembled with solid rivets. Seams are

gasketed.

2 each 8" rubber wheels in rear and 2 ea. 360° swivel casters in

front

Swing out hinged door secured in place with cam latch.

1" deep coarse particulate pre-filter (P/N: F621).

2" deep pleated particulate pre-filter (P/N: H502).

2" deep high capacity carbon filter for odors (P/N: VL1002).

Tested and certified to an efficiency of 99.97% or higher against

0.3 micron size particles (P/N: H610C-99).