Dell Inspiron 1501 - Turion X2 TL-60 2GB DDR2 Servicehandleiding - Pagina 7
Blader online of download pdf Servicehandleiding voor {categorie_naam} Dell Inspiron 1501 - Turion X2 TL-60 2GB DDR2. Dell Inspiron 1501 - Turion X2 TL-60 2GB DDR2 41 pagina's. Dell inspiron 1501 setting up
Ook voor Dell Inspiron 1501 - Turion X2 TL-60 2GB DDR2: Installatiehandleiding (2 pagina's), Installatiehandleiding (2 pagina's), Uw computer instellen (2 pagina's)
Pagina afdrukken
Back to Contents Page
ExpressCard/Hard-Drive Bay Assembly
Dell™ Inspiron™ 1501 Service Manual
Removing the ExpressCard/Hard-Drive Bay Assembly
Replacing the ExpressCard/Hard-Drive Bay Assembly
CAUTION:
Before you begin the following procedure, follow the safety instructions in the Product Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
NOTICE:
To help prevent damage to the system board, remove the main battery (see
computer.
Removing the ExpressCard/Hard-Drive Bay Assembly
1. Follow the instructions in
Before You
2. Remove the hard drive (see
3. Remove the optical drive (see
4. Remove the hinge cover (see
5. Remove the keyboard (see
6. Remove the display assembly (see
7. Remove the palm rest (see
8. Remove the six M2.5x 5-mm screws from the ExpressCard/hard-drive bay assembly.
1
M2.5 x 5-mm screws (6)
9. Remove the assembly from the system board.
Replacing the ExpressCard/Hard-Drive Bay Assembly
1. At a 45-degree angle, insert the end of the ExpressCard/hard-drive bay assembly into its access hole on the side of the computer base.
2. Lower the assembly aligning the screw holes on the assembly with the holes on the system board.
3. Replace the six M2.5x 5-mm screws from the assembly.
Begin.
Removing the Hard
Drive).
Removing an Optical
Drive).
Removing the Hinge
Cover).
Removing the
Keyboard).
Removing the Display
Assembly).
Removing the Palm
Rest).
2
ExpressCard/hard-drive bay assembly
Before Working Inside Your
Computer) before working inside the