Allied Telesis AR400 Series How-To

Blader online of download pdf How-To voor {categorie_naam} Allied Telesis AR400 Series. Allied Telesis AR400 Series 8 pagina's. How to set up pppoe between a linux client and access concentrator
Ook voor Allied Telesis AR400 Series: Hoe configureren (6 pagina's), Handleiding voor probleemoplossing (8 pagina's), Problemen oplossen (5 pagina's), Handleiding voor snelle installatie (8 pagina's), Handleiding voor snelle installatie (12 pagina's), Handleiding veiligheidsinformatie (18 pagina's)

How To |

Set Up PPPoE Between a Linux Client and an Allied Telesis

Access Concentrator

Introduction

This document describes how to set up PPPoE between a Linux client and an Allied Telesis

device.

What information you will find in this document

This document is divided into the following sections:

•

Configuring your Allied Telesis Device‚ page 2

•

Configuring Your Linux Device‚ page 3

•

Starting the Link‚ page 4

•

Debugging and Verifying‚ page 5

•

Other Hints‚ page 6

Which products and software versions does this information apply to?

•

Products:

Rapier, AT-8800, AT-8900, AT-9900, AT-9800 and SwitchBlade series switches

AR400 and AR700 series routers

•

Software versions: 2.7.1 and later

C613-16074-00 REV B