Allied Telesis AR400 Series How-To - Pagina 5

Blader online of download pdf How-To voor {categorie_naam} Allied Telesis AR400 Series. Allied Telesis AR400 Series 8 pagina's. How to set up pppoe between a linux client and access concentrator
Ook voor Allied Telesis AR400 Series: Hoe configureren (6 pagina's), Handleiding voor probleemoplossing (8 pagina's), Problemen oplossen (5 pagina's), Handleiding voor snelle installatie (8 pagina's), Handleiding voor snelle installatie (12 pagina's), Handleiding veiligheidsinformatie (18 pagina's)

Debugging and Verifying

Apart from PING, you can also check the following on your linux PC:

[root@linux_client michael]# ifconfig

ppp0 Link encap:Point-to-Point Protocol

[root@linux_client michael]# ps ax | grep ppp

4747 ?

4748 ?

4769 pts/0

[root@linux_client michael]# pppstats

310

On your Allied Telesis device, you can check the following:

ena ppp templ=1 debug=decode

ena ppp templ=1 debug=all

show ppp

show ppp pppoe

Set Up PPPoE Between a Linux Client and an Allied Telesis Access Concentrator

inet addr:192.168.0.1

UP POINTOPOINT RUNNING NOARP MULTICAST

RX packets:7 errors:0 dropped:0 overruns:0 frame:0

TX packets:8 errors:0 dropped:0 overruns:0 carrier:0

collisions:0

PACK VJCOMP

VJUNC

P-t-P:192.168.0.254

0:00 /usr/sbin/pppd pty pppoe -I eth1

0:00 pppoe -I eth1

0:00 grep ppp

VJERR

Mask:255.255.255.255

MTU:1492

Metric:1

OUT

PACK VJCOMP

322

VJUNC NON-VJ