Dell PowerEdge FD332 Gebruikershandleiding - Pagina 41
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Dell PowerEdge FD332. Dell PowerEdge FD332 46 pagina's.
Ook voor Dell PowerEdge FD332: Aan de slag (2 pagina's)
Pagina afdrukken
NOTE:
You cannot run diagnostics tests on PowerEdge FD332. You must run system diagnostics from the compute sled(s) to
which PowerEdge FD332 is mapped.
If you experience a problem with your system, run the system diagnostics before contacting Dell for technical assistance. The purpose of
running system diagnostics is to test your system hardware without requiring additional equipment or risking data loss. If you are unable to
fix the problem yourself, service and support personnel can use the diagnostics results to help you solve the problem.
Dell Embedded System Diagnostics
NOTE:
You cannot run diagnostics tests on PowerEdge FD332. You must run system diagnostics from the compute sled(s) to
which PowerEdge FD332 is mapped.
NOTE:
The Dell Embedded System Diagnostics is also known as Enhanced Pre-boot System Assessment (ePSA) diagnostics.
The Embedded System Diagnostics provides a set of options for particular device groups or devices allowing you to:
•
Run tests automatically or in an interactive mode
•
Repeat tests
•
Display or save test results
•
Run thorough tests to introduce additional test options to provide extra information about the failed device(s)
•
View status messages that inform you if tests are completed successfully
•
View error messages that inform you of problems encountered during testing
When to use the Embedded System Diagnostics
If a major component or device in the system does not operate properly, running the Embedded System Diagnostics may indicate
component failure.
Running the Embedded System Diagnostics from Boot
Manager
1
As the system boots, press <F11>.
2
Use the up and down arrow keys to select System Utilities > Launch Diagnostics.
The ePSA Pre-boot System Assessment window is displayed, listing all devices detected in the system. The diagnostics starts
executing the tests on all the detected devices.
Using system diagnostics
Using system diagnostics
6
41