Dell DX6012S Overzicht - Pagina 16

Blader online of download pdf Overzicht voor {categorie_naam} Dell DX6012S. Dell DX6012S 19 pagina's. Rack installation instructions — static rails
Ook voor Dell DX6012S: Aanvullende handleiding (4 pagina's), Instructies voor installatie van hardware (2 pagina's), Gebruikershandleiding (46 pagina's), Installatie- en configuratiehandleiding (43 pagina's), Installatie- en configuratiehandleiding (35 pagina's), Aan de slag handleiding (28 pagina's), Kennisgeving (28 pagina's), Kennisgeving (20 pagina's), Configuratiehandleiding (9 pagina's), Configuratiehandleiding (9 pagina's), Release Release (8 pagina's), Configuratiehandleiding (7 pagina's), Release Release (6 pagina's), Release Release (5 pagina's), Release-opmerkingen (5 pagina's), Aan de slag handleiding (47 pagina's), Installatie (2 pagina's), Installatie rek (2 pagina's)

Pagina afdrukken

Chapter 3. Configuration Parameters

You can configure the SCSP Proxy using either the Cluster Services Node (CSN) console or by

editing the scspproxy.cfg file. If you use CSN, see the CSN Installation and Configuration Guide.

3.1. Configuring the Proxy by Editing scspproxy.cfg

To configure the SCSP proxy when you are not using CSN, edit /etc/caringo/scspproxy/

scspproxy.cfg. The configuration file is divided into 5 sections: proxy, log, connectionpool, scsp,

and remote. The following table discusses all configuration parameters:

Option Name

[proxy] interface

[proxy] port

[proxy] reportHosts

[proxy] validationMode

[log] host

[log] port

[log] file

[log] fileSize

[log] level

Value

Ex: 192.168.1.1

Default: 80

Default: True

False

Ex: localhost

514

stdout

Description

The IP address of the external

interface for the server where

the proxy is installed.

The port of the external

interface the proxy will listen

on for the server where the

proxy is installed.

Enables or disables the ability

to detect the addresses of

cluster nodes. Valid case-

sensitive values are True and

False.

Whether or not the proxy

should be running in validation

mode or sending received

requests to the DX Storage

cluster.

The address of the syslog

server to send log messages

The port number of the syslog

server to send log messages

The name of the file to log

messages to if host is blank

Limit of the size of the log file.

Logging level, one of: 10 =

Debug (Info plus request data,

locator, and connection pool

logging), 20 = Info (Warn

plus request and response

tracing at a header level),

30 = Warn (Errors plus run-

time warnings), 40 = Error

(Significant internal errors,

connection errors, remote host

lookup errors, request syntax

errors)

Version 1.2

December 2010