Dell DX6012S Overzicht - Pagina 18

Blader online of download pdf Overzicht voor {categorie_naam} Dell DX6012S. Dell DX6012S 19 pagina's. Rack installation instructions — static rails
Ook voor Dell DX6012S: Aanvullende handleiding (4 pagina's), Instructies voor installatie van hardware (2 pagina's), Gebruikershandleiding (46 pagina's), Installatie- en configuratiehandleiding (43 pagina's), Installatie- en configuratiehandleiding (35 pagina's), Aan de slag handleiding (28 pagina's), Kennisgeving (28 pagina's), Kennisgeving (20 pagina's), Configuratiehandleiding (9 pagina's), Configuratiehandleiding (9 pagina's), Release Release (8 pagina's), Configuratiehandleiding (7 pagina's), Release Release (6 pagina's), Release Release (5 pagina's), Release-opmerkingen (5 pagina's), Aan de slag handleiding (47 pagina's), Installatie (2 pagina's), Installatie rek (2 pagina's)

Pagina afdrukken
Dell DX6012S Overzicht
#
# PARAMETERS
#
[proxy]
port = 80
interface = 192.168.1.1
validationMode = False
[log]
#<10 = CHATTER, which includes twisted.internet logs
#10 = DEBUG - Turns on detail message handling logs
#20 = INFO - Turns on request and response echo and connection pool logging
#40 = ERROR - Turns on error logging
level = 40
#default = localhost
#For stdout, leave blank.
host = localhost
#default = 514. Not used for empty host.
port = 514
#default = stdout. Not used if host is not empty.
file = stdout
#If loghost is empty and file is not stdout, this is the log file size
#limit
fileSize = 0
#If host is empty, this is not used. If host is not empty
#then hostBindInterface should be the host that will
#be written with log messages.
hostBindInterface = 'localhost'
facility = 0
[connectionPool]
maxStoredConnections = 200
connectTimeOut = 60
poolTimeOut = 300
[scsp]
hosts = 192.168.1.121 192.168.1.122 192.168.1.123
#name of the DX Storage cluster. This is the cluster we will dns browse for nodes
clusterName =
port = 80
[remote]
hostsConfigFile = /etc/caringo/scspproxy/hosts.cfg
#
# END

3.2. hosts.cfg

Communication with remote proxies or clusters is configured in a configuration file called hosts.cfg
that is installed by default in the /etc/caringo/scspproxy directory. The hosts.cfg file contains a list of
all known remote clusters, each configured with the following 5 values on a single line per cluster:
Option Name
ClusterName

Copyright © 2010 Caringo, Inc.

All rights reserved
Description
The common name for a remote cluster that
will be used in requests sent to the proxy. May
not contain whitespaces and cannot be a 32-
15
Version 1.2
December 2010