Dell PowerVault DR4100 Handleiding voor beste praktijken - Pagina 35

Blader online of download pdf Handleiding voor beste praktijken voor {categorie_naam} Dell PowerVault DR4100. Dell PowerVault DR4100 41 pagina's. Backup and recovery appliance
Ook voor Dell PowerVault DR4100: Aan de slag handleiding (10 pagina's), Handmatig (37 pagina's), Release Release (16 pagina's), Handmatig (12 pagina's), Handmatig (24 pagina's), Handmatig (23 pagina's), Qiuck-instellingen (1 pagina's), Handmatig (27 pagina's), Handmatig (25 pagina's)

Dell PowerVault DR4100 Handleiding voor beste praktijken
1.
On Lansing1 create a bond on the 1GB ports using the following command:
network --create_bond --bondif <bondN> --static –nwif <eth0,eth1,ethN> --mode <ALB | 802.3ad> –mtu
<512-9000> --ip <ipaddress> --netmask –restart
2.
Add replication to Lansing1 bond1 using the following command:
system –replication_traffic --add --interface <bond(0-N) | eth(0-N) | lo#>
 
3.
On Seattle1 create a bond on the 1GB ports using the following command:
network --create_bond --bondif <bondN> --static –nwif <eth0,eth1,ethN> --mode <ALB | 802.3ad> –mtu
<512-9000> --ip <ipaddress> --netmask –restart
4.
Create a route from Seattle1 to Lansing1 using the flowing command:
network --route --add --network <destination_network> --gateway <gateway addresses> --interface
<bond(0-N) | eth(0-N) | lo#>
5.
Create a route from Lansing1 to Seattle1 using the following command:
network --route --add --network <destination_network> --gateway <gateway addresses> --interface
<bond(0-N) | eth(0-N) | lo#>
 
administrator@Lansing1 > network --route --add --network <Seattle's 1G network> --
 
gateway <gateway addresses> --interface bond1
 
35
DR4100 Best Practice Guide | April 2014
administrator@Lansing1 > network --create bond --bondif bond1 --static –nwif eth2,eth3 --
mode ALB --mtu <512-9000> --ip <ipaddress> --netmask --restart
administrator@Lansing1 > system --replication_traffic --add --interface bond1
administrator@Seattle1 > network --create_bond --bondif bond1 --static –nwif eth2,eth3 --
mode ALB --mtu <512-9000> --ip <ipaddress> --netmask --restart
administrator@Seattle1> network --route --add --network <Lansing1's 1G network> --
gateway <gateway addresses> --interface bond1
Example
Example
Example
Example
Example