Dell PowerVault DR4100 Best Practices Manual - Page 35

Browse online or download pdf Best Practices Manual for Storage Dell PowerVault DR4100. Dell PowerVault DR4100 41 pages. Backup and recovery appliance
Also for Dell PowerVault DR4100: Getting Started Manual (10 pages), Manual (37 pages), Release Note (16 pages), Manual (12 pages), Manual (24 pages), Manual (23 pages), Qiuck Setup (1 pages), Manual (27 pages), Manual (25 pages)

Print Page
Dell PowerVault DR4100 Best Practices Manual
1.
On Lansing1 create a bond on the 1GB ports using the following command:
network --create_bond --bondif <bondN> --static –nwif <eth0,eth1,ethN> --mode <ALB | 802.3ad> –mtu
<512-9000> --ip <ipaddress> --netmask –restart
2.
Add replication to Lansing1 bond1 using the following command:
system –replication_traffic --add --interface <bond(0-N) | eth(0-N) | lo#>
 
3.
On Seattle1 create a bond on the 1GB ports using the following command:
network --create_bond --bondif <bondN> --static –nwif <eth0,eth1,ethN> --mode <ALB | 802.3ad> –mtu
<512-9000> --ip <ipaddress> --netmask –restart
4.
Create a route from Seattle1 to Lansing1 using the flowing command:
network --route --add --network <destination_network> --gateway <gateway addresses> --interface
<bond(0-N) | eth(0-N) | lo#>
5.
Create a route from Lansing1 to Seattle1 using the following command:
network --route --add --network <destination_network> --gateway <gateway addresses> --interface
<bond(0-N) | eth(0-N) | lo#>
 
administrator@Lansing1 > network --route --add --network <Seattle's 1G network> --
 
gateway <gateway addresses> --interface bond1
 
35
DR4100 Best Practice Guide | April 2014
administrator@Lansing1 > network --create bond --bondif bond1 --static –nwif eth2,eth3 --
mode ALB --mtu <512-9000> --ip <ipaddress> --netmask --restart
administrator@Lansing1 > system --replication_traffic --add --interface bond1
administrator@Seattle1 > network --create_bond --bondif bond1 --static –nwif eth2,eth3 --
mode ALB --mtu <512-9000> --ip <ipaddress> --netmask --restart
administrator@Seattle1> network --route --add --network <Lansing1's 1G network> --
gateway <gateway addresses> --interface bond1
Example
Example
Example
Example
Example