Dell PowerVault MD3660i Series Storage Array Handleiding voor probleemoplossing - Pagina 9

Blader online of download pdf Handleiding voor probleemoplossing voor {categorie_naam} Dell PowerVault MD3660i Series Storage Array. Dell PowerVault MD3660i Series Storage Array 20 pagina's. Storage arrays
Ook voor Dell PowerVault MD3660i Series Storage Array: Handleiding voor hardware en software (25 pagina's), Installatiehandleiding (11 pagina's), Aan de slag handleiding (10 pagina's), Informatie-update (8 pagina's), Instructies voor installatie van het rek (2 pagina's), Instellen (2 pagina's), Handleiding voor probleemoplossing (18 pagina's), Uitrolhandleiding (24 pagina's)

Troubleshooting the iSCSI Host Ports

There are two different RAID controller module host port layouts on the MD-series iSCSI storage arrays,

depending on model type:

Figure 4. Four-port MD3200i-series 1GB iSCSI storage array

Figure 5. Two-port MD3600i-series 10Gb iSCSI storage array

Default iSCSI Host and Management Port IP Addresses

Each port on the storage array is assigned a default, factory-set IP address. However, in the case of the

iSCSI host ports, these default addresses may not appear initially since DHCP is not enabled by default

at the factory.

Table 1. Default IP Addresses on MD-series storage array (all models)

Port ID

iSCSI port 0

iSCSI port 1

iSCSI port 2

Controller 0

192.168.130.101

192.168.131.101

192.168.132.101

Controller 1

192.168.130.102

255.255.255.0

192.168.131.102

255.255.255.0

192.168.132.102

255.255.255.0

Subnet mask