Dell PowerVault MD3660i Series Storage Array Troubleshooting Manual - Page 9

Browse online or download pdf Troubleshooting Manual for Storage Dell PowerVault MD3660i Series Storage Array. Dell PowerVault MD3660i Series Storage Array 20 pages. Storage arrays
Also for Dell PowerVault MD3660i Series Storage Array: Hardware And Software Manual (25 pages), Installation Manual (11 pages), Getting Started Manual (10 pages), Information Update (8 pages), Rack Installation Instructions (2 pages), Setting Up (2 pages), Troubleshooting Manual (18 pages), Deployment Manual (24 pages)

Print Page

Troubleshooting the iSCSI Host Ports

There are two different RAID controller module host port layouts on the MD-series iSCSI storage arrays,

depending on model type:

Figure 4. Four-port MD3200i-series 1GB iSCSI storage array

Figure 5. Two-port MD3600i-series 10Gb iSCSI storage array

Default iSCSI Host and Management Port IP Addresses

Each port on the storage array is assigned a default, factory-set IP address. However, in the case of the

iSCSI host ports, these default addresses may not appear initially since DHCP is not enabled by default

at the factory.

Table 1. Default IP Addresses on MD-series storage array (all models)

Port ID

iSCSI port 0

iSCSI port 1

iSCSI port 2

Controller 0

192.168.130.101

192.168.131.101

192.168.132.101

Controller 1

192.168.130.102

255.255.255.0

192.168.131.102

255.255.255.0

192.168.132.102

255.255.255.0

Subnet mask