Dell PowerVault NX1950 Uitrolhandleiding - Pagina 18

Blader online of download pdf Uitrolhandleiding voor {categorie_naam} Dell PowerVault NX1950. Dell PowerVault NX1950 34 pagina's. For vmware esx server software
Ook voor Dell PowerVault NX1950: Belangrijke informatie Handleiding (26 pagina's), Aan de slag (49 pagina's), Handleiding voor installatie en probleemoplossing (48 pagina's), Uitrolhandleiding (38 pagina's), Upgrade handleiding (18 pagina's), Referentiehandleiding (4 pagina's), Instellen (2 pagina's), Gebruik (2 pagina's), Configuratiehandleiding (11 pagina's)

To install Server Administrator, perform the following steps:

1 Insert the Dell PowerEdge Installation and Server Management CD into

your system's CD drive. If you are remotely accessing the console,

insert the CD into the PowerVault NX1950 storage system and not the

client system.

The CD loads and the Server Administrator Installer window appears.

2 Click Install, Modify, Repair or Remove Server Administrator.

3 In the License Agreement window, read and understand the agreement

and click Next.

4 In the Setup Type window, select the appropriate setup type for your

configuration and click Next.

5 In the Ready to Install window, click Install.

6 In the Install Wizard Completed window, click Finish.

Accessing Server Administrator

You can access Server Administrator locally through the host by

double-clicking the Server Administrator icon on the desktop. The

PowerVault NX1950 Management Console also has a link to Dell

OpenManage Systems Management Software in the "Dell Storage

Management Tools" section.

To access Server Administrator directly from a client system on the same

network, open Internet Explorer 6.0 or later and connect to the secure

port, 1311, of your PowerVault NX1950 storage system.

For example, type:

https://DELL1234567:1311

where DELL1234567 is the name of your PowerVault NX1950 storage

system.

If port 1311 is disabled by the firewall, use the following procedure to set

an exception to enable port 1311 for the use of Dell OpenManage Server

Administrator.

1 Click Start and select Settings→ Control Panel→ Windows

Firewall.

2 Click the Exceptions tab.

Deployment Guide