Dell PowerVault NX1950 Belangrijke informatie Handleiding - Pagina 17

Blader online of download pdf Belangrijke informatie Handleiding voor {categorie_naam} Dell PowerVault NX1950. Dell PowerVault NX1950 26 pagina's. For vmware esx server software
Ook voor Dell PowerVault NX1950: Uitrolhandleiding (34 pagina's), Aan de slag (49 pagina's), Handleiding voor installatie en probleemoplossing (48 pagina's), Uitrolhandleiding (38 pagina's), Upgrade handleiding (18 pagina's), Referentiehandleiding (4 pagina's), Instellen (2 pagina's), Gebruik (2 pagina's), Configuratiehandleiding (11 pagina's)

Dell PowerVault NX1950 Belangrijke informatie Handleiding
9 The Configure or Skip RAID window appears. Perform the following
steps:
Select one of the following options, and then click Continue:
a
Configure RAID
Skip RAID configuration
NOTE:
both the internal hard disk drives, and this is the supported
hardware configuration for your system.
If you selected Skip RAID configuration, go to step 10.
b
If you selected Configure RAID, configure RAID with one of the
c
following options:
Click Go to Advanced Wizard at the top left of the page and
follow the prompts.
Select a RAID level and click Continue.
NOTE:
boot disk.
The RAID configuration summary appears.
Click Continue.
d
The following message appears:
All existing virtual disk(s) on this
controller will be deleted and all data will
be lost.
Click OK to continue.
e
The Select an Operating System to Install window appears.
10 To set up a new boot partition, select the appropriate file system and
size for your partition and click Continue.
NOTICE:
window appears. Click Continue. Server Assistant deletes all existing
partitions on the hard drive.
NOTE:
NTFS-NT file system.
The Network Adapter(s) configuration window appears.
Your system was pre-configured with hardware RAID1 using
Select RAID1 to ensure adequate redundancy for the
If the hard drive has a partition, the Confirm to delete partition
For maximum system security, Dell recommends selecting
Important Information
17