Dell PowerVault NX1950 Handleiding voor installatie en probleemoplossing - Pagina 17

Blader online of download pdf Handleiding voor installatie en probleemoplossing voor {categorie_naam} Dell PowerVault NX1950. Dell PowerVault NX1950 48 pagina's. For vmware esx server software
Ook voor Dell PowerVault NX1950: Uitrolhandleiding (34 pagina's), Belangrijke informatie Handleiding (26 pagina's), Aan de slag (49 pagina's), Uitrolhandleiding (38 pagina's), Upgrade handleiding (18 pagina's), Referentiehandleiding (4 pagina's), Instellen (2 pagina's), Gebruik (2 pagina's), Configuratiehandleiding (11 pagina's)

Pagina afdrukken
Dell PowerVault NX1950 Handleiding voor installatie en probleemoplossing
1
NIC port A to Gb Ethernet switch
(optional) for MSCS heartbeat
2
NIC port B to Gb Ethernet switch
(optional)
3
On-board Gb1 and Gb2 to Gb
Ethernet switch(es)
4
Port 1 on PowerVault NX1950
storage system 0 SAS HBA to
In-0 on controller 1

Cabling Your Gateway Solution

Figure 2-3 shows the PowerVault NX1950 Gateway cluster solution. You must
connect the Qlogic Adapters on both the PowerVault NX1950 storage systems
to the Dell|EMC storage arrays to enable the storage systems as cluster
nodes. For your Ethernet port connection, it is recommended that you use
the on-board connections for the public network. These on-board NIC
connections support TOE. If available, dedicate one optional NIC port for
the MSCS heartbeat connection; otherwise you must dedicate one on-board
connection for the MSCS heartbeat.
5
Port 1 on PowerVault NX1950 storage
system 1 SAS HBA to In-1 on controller 1
6
Port 0 on PowerVault NX1950 storage
system 1 SAS HBA to In-1 on controller 0
7
Port 0 on PowerVault NX1950 storage
system 0 SAS HBA to In-0 on controller 0
8
DRAC port to Ethernet switch for lights-out
management (optional)
Setting Up Your Cluster
17