Dell PowerVault NX1950 Handleiding voor installatie en probleemoplossing - Pagina 15

Blader online of download pdf Handleiding voor installatie en probleemoplossing voor {categorie_naam} Dell PowerVault NX1950. Dell PowerVault NX1950 48 pagina's. For vmware esx server software
Ook voor Dell PowerVault NX1950: Uitrolhandleiding (34 pagina's), Belangrijke informatie Handleiding (26 pagina's), Aan de slag (49 pagina's), Uitrolhandleiding (38 pagina's), Upgrade handleiding (18 pagina's), Referentiehandleiding (4 pagina's), Instellen (2 pagina's), Gebruik (2 pagina's), Configuratiehandleiding (11 pagina's)

Before setting up a cluster, you must complete several initial tasks of

connecting to the array, naming the array, and setting up the preliminary

items. For more information regarding the initial tasks to perform, see

"Prerequisites for Cabling Your Cluster" on page 15.

Prerequisites for Cabling Your Cluster

You must set up at least two LAN connections to enable your storage solution as a

cluster. The PowerVault NX1950 cluster solution uses one or more

connections for client access (public) IP addresses and a dedicated

connection for heartbeat (private) network. Ensure that the heartbeat

connection is configured on a separate subnet.

Figure 2-1. PowerVault NX1950 Management Console

NOTE:

You must set up two static IP addresses on two different subnets for the

cluster—one for the private (heartbeat) network and one for the client access

(public) network.

Setting Up Your Cluster