Dell PowerVault NX1950 Handleiding voor installatie en probleemoplossing - Pagina 22

Blader online of download pdf Handleiding voor installatie en probleemoplossing voor {categorie_naam} Dell PowerVault NX1950. Dell PowerVault NX1950 48 pagina's. For vmware esx server software
Ook voor Dell PowerVault NX1950: Uitrolhandleiding (34 pagina's), Belangrijke informatie Handleiding (26 pagina's), Aan de slag (49 pagina's), Uitrolhandleiding (38 pagina's), Upgrade handleiding (18 pagina's), Referentiehandleiding (4 pagina's), Instellen (2 pagina's), Gebruik (2 pagina's), Configuratiehandleiding (11 pagina's)

Figure 2-6. New Server Cluster Wizard

NOTE:

reported as a result of the firewall being enabled. This does not impact

successful cluster creation. For more information about firewall port

exceptions, see "Firewall Port Exceptions" on page 9.

11 The cluster creation process is complete. If any errors have occurred during the

cluster creation, the color of the progress bar appears red. Click Next.

12 The Completing the New Server Cluster Wizard screen appears.

Click Finish.

NOTE:

The PowerVault NX1950 cluster solution supports only two nodes with the

PowerVault MD3000 storage array (Integrated Solution) and up to eight nodes

with the Dell|EMC storage arrays (Gateway Solution).

After the node(s) are added, complete the on-screen instructions.

13 Click Create or Join Cluster in the PowerVault NX1950 Initial

Configuration Tasks wizard. In the remaining cluster nodes, start the

PowerVault NX1950 Initial Configuration Tasks wizard, and click Create

or Join Cluster.

Setting Up Your Cluster

The cautions in the Creating the Cluster window in Figure 2-6 are

This wizard gives you an option to add additional nodes to the cluster.