Dell Force10 S55 Handmatig - Pagina 5

Blader online of download pdf Handmatig voor {categorie_naam} Dell Force10 S55. Dell Force10 S55 50 pagina's.
Ook voor Dell Force10 S55: Snelstarthandleiding (29 pagina's)

Pagina afdrukken

About this Guide

This guide provides site preparation recommendations, step-by-step procedures for rack mounting and

desk mounting, inserting optional modules, and connecting to a power source.

After you have completed the hardware installation and power-up of the S55, refer to the FTOS

Configuration Guide for the S55 for software configuration information and the FTOS Command

Reference for the S55 for Command Line Interface (CLI) information.

NOTE: The S55 requires FTOS version 8.3.5.0. Refer to the S55 Release Notes for information on upgrading

the system, if necessary. Contact Dell Force10 Technical Support with any questions regarding FTOS

versions and upgrades.

CAUTION: Wear grounding wrist straps when handling this equipment to avoid ESD damage.

WARNING: The installation of this equipment shall be performed by trained and qualified personnel only.

Read this guide before installing and powering up this equipment. This equipment contains two power cords.

Disconnect both power cords before servicing.

WARNING: This equipment contains optical transceivers, which comply with the limits of Class 1 laser

radiation.

WARNING: Visible and invisible laser radiation may be emitted from the aperture of the optical transceiver

ports when no cable is connected. Avoid exposure to laser radiation and do not stare into open apertures.

Information symbols and warnings

The following graphic symbols are used in this document to bring attention to hazards that exist when

handling the S55 and its components. Please read these alerts and heed their warnings and cautions.

Table

describes symbols contained in this guide.

Table 1-1. Information Symbols

Symbol

Warning

Description

Note

This symbol informs you of important operational information.

Caution

This symbol informs you that improper handling and installation could result in equipment damage or

loss of data.

Warning

This symbol signals information about hardware handling that could result in injury.

About this Guide