Dell Force10 S60 Series Snelstarthandleiding - Pagina 21
Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Dell Force10 S60 Series. Dell Force10 S60 Series 29 pagina's.
Ook voor Dell Force10 S60 Series: Handmatig (45 pagina's)
Pagina afdrukken
Table 2-1. Pin Assignments Between the Console and a DTE Terminal Server
S55/S60
RJ-45 to RJ-45 Rollover Cable RJ-45 to DB-9
Console Port
Signal
RJ-45 pinout
NC
TxD
GND
GND
RxD
NC
CTS
USB-B Console
The USB-B connector port is labeled on the S55/S60 chassis. It is to the left of
the management ports, as you face the rear of the chassis.
S55
Step
Task
Power on the PC (XP operating system recommended).
1
Connect the USB-A end of cable (supplied) into an available USB port on the
2
PC.
Connect the USB-B end of cable into the USB-B console port on the chassis.
3
Power on the chassis.
4
Install necessary USB device drivers (internet connection required).
5
Contact Dell Force10 TAC for CD, if necessary.
RJ-45 Pinout
2
7
3
6
4
5
5
4
6
3
7
2
8
1
USB-B Port
Adapter
DB-9 Pin
6
2
5
5
3
4
7
S60
Installing the Software
Terminal
Server Device
Signal
DSR
RxD
GND
GND
TxD
DTR
RTS
USB-B
Port
19