Dell N1124T-ON Aan de slag handleiding - Pagina 16

Blader online of download pdf Aan de slag handleiding voor {categorie_naam} Dell N1124T-ON. Dell N1124T-ON 27 pagina's.

Booting the N1100-ON Series Switch

When the power is turned on with the local terminal already connected, the

switch goes through a power-on self-test (POST). POST runs every time the

switch is initialized and checks hardware components to determine if the

switch is fully operational before completely booting. If POST detects a

critical problem, the program flow stops. If POST passes successfully, valid

firmware is loaded into RAM. POST messages are displayed on the terminal

and indicate test success or failure. The boot process runs for approximately

60 seconds.

You can invoke the Boot menu after the first part of the POST is completed.

From the Boot menu, you can perform configuration tasks such as resetting

the system to factory defaults, activating the backup image, or recovering a

password. For more information about the Boot menu functions, refer to the

CLI Reference Guide.

Getting Started Guide