Dell Z9100-ON Installatiehandleiding - Pagina 10
Blader online of download pdf Installatiehandleiding voor {categorie_naam} Dell Z9100-ON. Dell Z9100-ON 43 pagina's. Open networking
Ook voor Dell Z9100-ON: Installatiehandleiding (45 pagina's), Installatiehandleiding (45 pagina's)
Pagina afdrukken
Table 4. QSFP28 Port LEDs (4x25 GbE or 4x10 GbE Mode)
LED
Link LED
Activity LED
Table 5. SFP+ Port LEDs
LED
Link LED
Activity LED
Table 6. Stacking Port LEDs
LED
Stacking LED
Prerequisites
The following is a list of components required for successful installation of the Z9100-ON.
NOTE: Detailed installation instructions for the Z9100-ON are provided in
Install the
Z9100-ON.
•
Z9100–ON chassis (or multiple chassis, if stacking)
•
AC or DC cables to connect the AC or DC power source to each of the chassis' AC or DC power
supplies (country/regional specific)
•
Mounting brackets for rack installation (included)
•
Screws for rack installation
•
#1 and #2 Phillips screw drivers (not included)
•
Torx screwdriver (not included)
•
Ground cable screws (included)
•
Copper/fiber cables
Other optional components are:
•
Ground cable
10
Description
•
Off — No Link
•
Solid green — Port link is 4x25 GbE
•
Solid amber — Port link is 4x10 GbE
•
Off — No Link
•
Flashing green (~30 ms) — Port link is 4x25 GbE
•
Flashing amber (~30 ms) — Port link is 4x10
GbE
Description
•
Off — No Link
•
Solid green — Link operating at maximum port
speed
•
Solid amber — Link operating at lower speed
•
Off — No Link
•
Flashing green (~30 ms) — port activity
Description
•
Off — System I sthe Salve of the stack
•
Solid green — System is the Master of the stack
or a standalone unit
Site Preparations
and
The Z9100–ON System