Entech U-BLUE Bedieningshandleiding - Pagina 6

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Entech U-BLUE. Entech U-BLUE 15 pagina's. Undersink alkaline water ionizer

Pagina afdrukken

Accessories

Product Requirement :

Water pressure should be maintained at a constant rate,

when the water pressure is too low, water cannot flow through the unit.

(installed under

1/4"

Circle nut

1/4"

5/16"

Acidic hose

Alkaline hose

Gasket

the Faucet)

Alkaline Water

Outlet Adapter

PE Hose (1/4")

Alkaline Water

Outlet Adapter

(Hole size : 5/16")

Please connect to top cap of the ionizer

for installation Faucet.

How to install

To connect the U-Blue faucet

All the fittings are push in style fittings. To attach the hoses to any fitting, firmly insert the end of

the hose into the fitting. Pull firmly to check to connection - you should not be able to pull the

hose out. To release the hose from the fitting, you must push the spring loaded ring protruding

from the end of the fitting while pulling the hose out.

WARNING: incorrect installation could void your valuable warranty

- professional installation is recommended.

29mm

Dust Pre-Filter

Figure 1

PE Hose (5/16")

Figure 2

Red color

(Acidic Water)

White color

(Alkaline Water)

Use appropriate tools to make 29mm

diameter hole in the location where you will set

up the faucet. Make sure the faucet location

will allow both spouts to reach the sink.

Place the faucet in the hole properly over

the gasket.

Figure 2

Insert the faucet in the hole and then screw

it with a nut to make it be fixed.

After the faucet is fixed, connect it to fitting

with 1/4" hose(for Alkaline) like figure 4.

Check the hose whether it is inserted properly

or not. Also, connect it with 1/4" hose(for Acidic)

like figure 4 and connect the faucet to the body

with connector cord.

Figure 4

Circle nut

1/4" Red color Tube

Figure 3

(Acidic Water)

1/4"

Harness

1/4" White color Tube

(Alkaline Water)

1/4"

5/16"