Award H902B Gebruiksaanwijzing - Pagina 10

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Award H902B. Award H902B 20 pagina's.

Pagina afdrukken



To stop the cooking time:

Action

Select the Timer

Stop the time

If several timers are activated, repeat the process.



Egg timer function :

Egg timer is an independent function. It stops as soon as a heating zone starts up.

If the egg timer is on and the hob is switched off, the timer continues until time runs out.

Action

Activate the hob

Select the Timer

Decrease the time

Increase the time

After a few seconds, the [ min ] display stops with blinking.

The time is confirmed and the timer starts.



Automatic stop at the end of the cooking time:

As soon as the selected cooking time is finished the timer displays blinking [ 000 ] and a sound

rings.

To stop the sound and the blinking, press the key [ - ] and [ + ].

Automatic cooking

All the cooking zones are equipped with an automatic cooking device. The cooking zone starts at

full power during a certain time, and then reduces automatically its power on the pre-selected

level.

 Start-up :

Action

Power level selection

(for example « 7 »)

 Switching off the automatic cooking:

Action

Power level selection

Stop&Go function

This function brakes all the hob's cooking activity temporarily and allows restarting with the same

settings.

 Start up/stop the pause function:

Action

Engage pause

Stop the pause

Control panel

Press simultaneously key [ - ] and [ + ] Timer display on

from the timer until the

desired display is on

Press key [ - ] from the timer

Control panel

press display [

]

Press simultaneously key [ - ] and [ + ] [ 000 ]

from the timer

Press key [ - ] from the timer

Press key [ + ] from the timer

Control panel

slide on the "SLIDER" to [ 7 ]

and stay 3s

Control panel

slide on the "SLIDER"

Control panel

press pause key

Press on the animated "slider"

Display

[ 000 ]

Display

[ 0 ]

[ 60 ] to 59, 58...

Time increase

Display

[ 7 ] is blinking with [ A ]

Display

[ 0 ] to [ 9 ]

Display

[ II ] and control light on

"Slider" animated

previous settings