Award H902B Інструкція із застосування - Сторінка 10
Переглянути онлайн або завантажити pdf Інструкція із застосування для Варильна поверхня Award H902B. Award H902B 20 сторінок.
Друкувати сторінку
To stop the cooking time:
Action
Select the Timer
Stop the time
If several timers are activated, repeat the process.
Egg timer function :
Egg timer is an independent function. It stops as soon as a heating zone starts up.
If the egg timer is on and the hob is switched off, the timer continues until time runs out.
Action
Activate the hob
Select the Timer
Decrease the time
Increase the time
After a few seconds, the [ min ] display stops with blinking.
The time is confirmed and the timer starts.
Automatic stop at the end of the cooking time:
As soon as the selected cooking time is finished the timer displays blinking [ 000 ] and a sound
rings.
To stop the sound and the blinking, press the key [ - ] and [ + ].
Automatic cooking
All the cooking zones are equipped with an automatic cooking device. The cooking zone starts at
full power during a certain time, and then reduces automatically its power on the pre-selected
level.
Start-up :
Action
Power level selection
(for example « 7 »)
Switching off the automatic cooking:
Action
Power level selection
Stop&Go function
This function brakes all the hob's cooking activity temporarily and allows restarting with the same
settings.
Start up/stop the pause function:
Action
Engage pause
Stop the pause
Control panel
Press simultaneously key [ - ] and [ + ] Timer display on
from the timer until the
desired display is on
Press key [ - ] from the timer
Control panel
press display [
]
Press simultaneously key [ - ] and [ + ] [ 000 ]
from the timer
Press key [ - ] from the timer
Press key [ + ] from the timer
Control panel
slide on the "SLIDER" to [ 7 ]
and stay 3s
Control panel
slide on the "SLIDER"
Control panel
press pause key
press pause key
Press on the animated "slider"
10
Display
[ 000 ]
Display
[ 0 ]
[ 60 ] to 59, 58...
Time increase
Display
[ 7 ] is blinking with [ A ]
Display
[ 0 ] to [ 9 ]
Display
[ II ] and control light on
"Slider" animated
previous settings