Miele DA 209 Gebruiksaanwijzing - Pagina 14

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Miele DA 209. Miele DA 209 36 pagina's. Cooker

Pagina afdrukken

Operation

Filter operating hours counter

An indicator lamp shows when the

grease filter needs to be changed. The

operating hours counter for the grease

filters is set at the factory for a certain

number of hours but these can be

changed.

The operating hours counter for the ac-

tive charcoal filter is set at "unlimited",

as this is only relevant if using your

cooker hood in recirculation mode with

an active charcoal filter fitted. If you are

choosing to use recirculation mode the

hours counter for the active charcoal fil-

ter must be set for a specific time.

At the end of the set period the indica-

tor lamp for the grease filter touch con-

trol or the lamp for the active charcoal

filter touch control glows. The grease fil-

ter must then be cleaned. The active

charcoal filter needs to be replaced.

The filter operating hours counter must

then be re-set for the same period as

before.

Press the grease filter touch control

or the charcoal filter touch control for

about 4 seconds.

The indicator lamp will go out.

Reading the filter operating

hours counter

Before reaching the end of the period

set, you can check the percentage of

the time set which has already been

used up.

Use the On/Off touch control to

switch the fan on.

Press the grease filter touch control

or the active charcoal filter touch

control.

One or several of the indicator lamps

for the _ touch control will glow.

The number of flashing lamps show the

percentage of the operating time set

which has already been used up:

1 lamp = less than 25 %

2 lamps = less than 50 %

3 lamps = less than 75 %

4 lamps = less than 100 %

The operating hours completed remain

in memory, even when the machine is

switched off or there is a power cut.