Miele DA 289-3 Bedienings- en installatie-instructies - Pagina 15
Blader online of download pdf Bedienings- en installatie-instructies voor {categorie_naam} Miele DA 289-3. Miele DA 289-3 32 pagina's. Decorator wall hood
Ook voor Miele DA 289-3: Productafmetingen (2 pagina's)
Pagina afdrukken
^ Clean the filter
-
use a scrub brush in
warm water with a mild detergent.
-
the lower basket, making sure that
the spray arm is not blocked.
Depending on the detergent, clean-
ing the grease filter in a dishwasher
may cause permanent discoloration
of the filter surface. Performance of
the filter will not be affected by this
discoloration.
^ After cleaning, the filter can be
placed on a towel to air dry.
^ Clean the air intake panel according
to "Cleaning the casing".
^ While the filter and the air intake
panel are removed, clean any dirt or
grease from the interior casing to pre-
vent the risk of fire.
place the filters in
^ Push the grease filter back in place.
^ Hook the air intake panel on the
latches and push a little to the left.
Push it toward the unit so that it clicks
in place.
^ After returning the grease filter, press
the grease filter button for 3 seconds
to reset the timer.
The indicator light will go out.
^ If the grease filter and air intake
panel are cleaned
filter timer has reached its maximum,
the grease filter button should be
pressed for 6 seconds to reset the
counter to zero.
the grease
15