Miele DA 289-3 Bedienings- en installatie-instructies - Pagina 16
Blader online of download pdf Bedienings- en installatie-instructies voor {categorie_naam} Miele DA 289-3. Miele DA 289-3 32 pagina's. Decorator wall hood
Ook voor Miele DA 289-3: Productafmetingen (2 pagina's)
Pagina afdrukken
Before cleaning or servicing the
hood, disconnect it from the power
supply by either removing the fuse,
unplugging it from the outlet or man-
ually "tripping" the circuit breaker.
,
Never use abrasive cleaners,
scouring pads, steel wool or caustic
(oven) cleaners on the hood. They
will damage the surface.
^ The air intake panel, exterior surfaces
and controls can be cleaned with
warm water and liquid dish soap ap-
plied with a soft sponge.
^ Wipe dry using a soft cloth.
Only use a slightly damp sponge
when cleaning the controls. Water
could penetrate into the electronics
and cause damage.
Glass surfaces can be cleaned using
glass cleaner.
16
Stainless steel surfaces can be cleaned
using a non-abrasive stainless steel
cleaner.
To help prevent resoiling, a conditioner
for stainless steel can also be used.
Apply sparingly with even pressure.
^ These controls may become discol-
ored or damaged if not cleaned regu-
larly.
Do not use a stainless steel cleaner
on these controls.