Miele Novotronic T 220 Gebruiksaanwijzing - Pagina 21
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Miele Novotronic T 220. Miele Novotronic T 220 44 pagina's. Novotronic vented tumble dryer
Ook voor Miele Novotronic T 220: Gebruiksaanwijzing (44 pagina's)
Pagina afdrukken
Problem
The drying
process goes on
too long or even
switches off.
Possible cause
Important: Before attempting to remedy one of the following
causes, switch the dryer off and switch on again to start the
programme again.
Ventilation to the dryer is
insufficient (e.g. because it
is installed in a room which
is too small).
The fluff filter may be
blocked.
The vent ducting or the
ventilation outlet is blocked.
The laundry has not been
spun sufficiently.
The tumble dryer has been
overloaded.
Metallic components, e.g.
zips have prevented the
dryer from registering the
correct moisture level in the
laundry.
Problem solving guide
Remedy
Open a door or window while
the machine is in operation for
increased air flow.
Remove any fluff.
– Check all parts of the
extraction system on a
regular basis (e.g. wall vent,
external grille, bends in the
ducting etc.) and make sure
they are all free of any
hindrance.
– Remove any fluff.
Make sure that your laundry is
thoroughly spun at the
appropriate spin speed.
Do not exceed the maximum
load for the programme
selected.
– Close zips and fasten any
hooks next time.
If the problem occurs again,
dry garments with long zips
using "Timed drying - Warm
air".
21