HP -380467-003 - COMPAQ PRESARIO C300 C500 C700 F500 F700 LAPTOP CHARGER Handmatig - Pagina 18

Blader online of download pdf Handmatig voor {categorie_naam} HP -380467-003 - COMPAQ PRESARIO C300 C500 C700 F500 F700 LAPTOP CHARGER. HP -380467-003 - COMPAQ PRESARIO C300 C500 C700 F500 F700 LAPTOP CHARGER 24 pagina's. Intervideo ã¥â®â¶ã¥âºâã¥â½â±ã©â„¢â¢ ã¥â¿â«ã©â‚¬å¸ã¥â€¦â¥ã©â€”â¨ã¦å’â€¡ã¥ââ€”
Ook voor HP -380467-003 - COMPAQ PRESARIO C300 C500 C700 F500 F700 LAPTOP CHARGER: Gebruikershandleiding (37 pagina's), Ondersteuningshandleiding (27 pagina's), Handmatig (10 pagina's), Snelstarthandleiding (8 pagina's), Aan de slag handleiding (2 pagina's), Belangrijke informatie (1 pagina's), Belangrijke informatie (1 pagina's), Belangrijke kennisgeving (1 pagina's), Aanvullende handleiding (1 pagina's), Ondersteuningshandleiding (29 pagina's), Handmatig (8 pagina's)

8 Place the second hard disk drive inside the chassis

and align it with the screw holes (P) on the front of

the chassis. Use four regular 6/32 x ¼-inch screws

(not included) to secure the hard disk drive to the

front of the PC. Tighten the screws from the front of

the PC chassis into the drive.

9 Place the hard disk drive bracket over the new

second hard disk drive, align the four tabs with the

holes on the front of the chassis, and then slide the

bracket toward the bottom of the chassis until it

snaps into place (Q).

Upgrading and Servicing Guide

10 Attach the two screws to the hard disk drive

bracket (R).

11 Replace the hard disk drive. See "Replacing a Hard

Disk Drive" on page 11.

12 Connect the end of the data cable to the

motherboard:

•

For Serial ATA drives, plug the free end of the

narrow data cable from the second hard disk

drive to the motherboard connector labeled

SATA2 and plug the narrow data cable from

the primary hard disk drive to the motherboard

connector labeled SATA1.

•

For Parallel ATA drives, connect the data

IDE cable labeled To CPU to the motherboard

connector Primary.

13 Replace the front panel. See "Replacing the Front

Panel" on page 3.

14 Complete the procedures to replace the side panel,

and to close the PC. See "Opening and Closing the

PC" on page 1.