Miele T 1576 Technische informatie - Pagina 20

Blader online of download pdf Technische informatie voor {categorie_naam} Miele T 1576. Miele T 1576 42 pagina's. Vented dryer
Ook voor Miele T 1576: Gebruiksaanwijzing (40 pagina's), Gebruiksaanwijzing (40 pagina's)

Pagina afdrukken

Technical Information

The condenser system draws air from outside the appliance via the condensate

fan (Item 8). The outside air passes through the heat exchanger in a 90° direction

from the drying air. The temperature difference between the two allows moisture

(condensation) to form on the heat exchanger. As the moisture level increases,

water droplets collect in a trough.

When the condensed water accumulates to a specific value, the condensate float

switch activates. The electronic switches on the condensate pump (Item 10) and

the water is pumped to the condensed-water drawer (Item 1). Should the

condensed-water drawer become full prior to the end of a cycle, the "Empty out

container" LED will light up and the program will stop.

Note:

Condenser dryers can be configured with an optional drain line. With this

configuration the condensed water is pumped directly into the drain, so

emptying the condensed-water drawer is not necessary.

4.3

Fan Motor (M5) Assembly

Figure 4-3: Fan Motor Assembly

1 Pulley/belts

2 Motor bracket

3 Motor start capacitor

4 Fan motor (120VAC)

5 Fan housing cover

6 Fan impeller

7 Fan housing

8 Motor assembly slide track

T 15xx Dryers