Bürkert 8792 Montagehandleiding - Pagina 5
Blader online of download pdf Montagehandleiding voor {categorie_naam} Bürkert 8792. Bürkert 8792 16 pagina's. Position controller and process controller with ii 3g ex ec ic iic t4 gc / ii 3d ex tc iiic t135c dc approval
Ook voor Bürkert 8792: Montagehandleiding (16 pagina's), Extra instructies (12 pagina's)
Pagina afdrukken
9.
sTarT-up
9.1.
setting the position indicator
→
Loosen the 4 fastening screws and lift the cover off the
position indicator.
Fastening screws
Cover
Fig. 4:
Opening position indicator
Specifying home position:
→
Move the pneumatic actuator to the home position.
→
Rotate the complete display element until the yellow
marking bar is pointing in the required direction.
→
Move the first switching flag until the LED for the home
position proximity switch starts to light up.
(The LED is lit when the proximity switch is actuated).
english
16
→
Attach the cover for the external position indicator and
screw tight.
The external position feedback is now ready for operation.
english
18
Specifying end position:
→
Move the pneumatic actuator to the end position.
→
Move the second switching flag until the LED for the
end position proximity switch starts to light up.
When doing so, hold the previously set switching flag
to prevent it from shifting.
Display element with marking bar
Proximity switch 1
LED for
proximity switch 1
Switching flags
LED for proximity switch 2
Proximity switch 2
Fig. 5:
Setting position indicator
Type 8791, 8792, 8793
english
17