Bürkert 8792 조립 지침 매뉴얼 - 페이지 5

{카테고리_이름} Bürkert 8792에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bürkert 8792 16 페이지. Position controller and process controller with ii 3g ex ec ic iic t4 gc / ii 3d ex tc iiic t135c dc approval
Bürkert 8792에 대해서도 마찬가지입니다: 조립 지침 매뉴얼 (16 페이지), 추가 지침 (12 페이지)

페이지 인쇄

sTarT-up

9.1.

setting the position indicator

→

Loosen the 4 fastening screws and lift the cover off the

position indicator.

Fastening screws

Cover

Fig. 4:

Opening position indicator

Specifying home position:

→

Move the pneumatic actuator to the home position.

→

Rotate the complete display element until the yellow

marking bar is pointing in the required direction.

→

Move the first switching flag until the LED for the home

position proximity switch starts to light up.

(The LED is lit when the proximity switch is actuated).

english

→

Attach the cover for the external position indicator and

screw tight.

The external position feedback is now ready for operation.

english

Specifying end position:

→

Move the pneumatic actuator to the end position.

→

Move the second switching flag until the LED for the

end position proximity switch starts to light up.

When doing so, hold the previously set switching flag

to prevent it from shifting.

Display element with marking bar

Proximity switch 1

LED for

proximity switch 1

Switching flags

LED for proximity switch 2

Proximity switch 2

Fig. 5:

Setting position indicator

Type 8791, 8792, 8793

english