Alloy LED AL-60-03-0008 Specificaties - Pagina 5

Blader online of download pdf Specificaties voor {categorie_naam} Alloy LED AL-60-03-0008. Alloy LED AL-60-03-0008 7 pagina's. Led wifi controller hub

Pagina afdrukken

controller

1)Search and connect the Easylighting

2)Enter easy lighting application

3)Short press setting button

Specifications

4)Press

(P1)

5)Press yes

(P2).

P10

Room editing information

Creating and Editing Rooms (Zones)

1.Short press setting button

Go to "Settings" (P1) . Press the "Edit Room Information" button (P1) and the room editing page will appear. (P9)

2.Short press Edit room information button

there will be room editing page as(P9)

Edit the room name:

a. Edit room/zone name

1. Press the Edit button. (P9)

1)Press Edit button

(P9)

2)Click the words("bedroom" for example)

2. Select the room ("bedroom" for example).

3)Clean the old name and enter a new name ( zone for example)

4)Press save button

(P11)

3. Delete the old name and enter a new name

("zone" for example). (P11)

b. Change picture for the room

1)Press Edit button

(P9)

4. Press the Save button. (P11)

2)Short press the middle of the room picture(P10)

3)Camera will be opened automatically

Assign a color wheel for the room:

4)Take a picture

1. Press the Edit button. (P9) Four color wheel

5)Click use photo

(P12)

6)Press save button

(P10)

images will appear.

2. Uncheck the wheels that you don't want to

c. Edit color wheel for corresponding LED lighting

select, leaving the wheel checked that you

1)Press Edit button

there will be four different color wheel in

lower right

want to select. (P10)

2)Cancel the mark for other three color wheels and keep one

( take single color as example)

3. Press Save.

3)Press save

4. After editing, click the Back button to return to

4)Choose this zone there will be one directly enter

corresponding color wheel

Settings.

For RGBW LED lighting

Select an LED controller (P13)

For CDW LED lighting

1. When connecting the Easylighting app directly to the WiFi

Hub, you can select only one controller at a time.

2. When connecting the Easylighting to the WiFi Hub via a

home network, you can select several controllers at a time.

Learning (Pairing)

First method:

1. Select any one room. There will be green

checkmark on the upper right side.

2. Press the Room button.

3. Short press the learning key on the Wireless

Receiver.

4. Touch the color wheel in the app. The LED lights

will blink to confirm the room designation.

To unlearn the room designation, press the learning key on the Wireless Receiv-

er for at least 5 seconds until the LED lights flash, then the learned ID is deleted.

Pairing with the Remote Control:

If you have a remote control that is compatible with the Wireless Receiver, it can also be used for pairing. The

"Easylighting" app will follow the zones established by the remote. For example, if you set up zone 2 with the re-

mote, then you can use the app to control zone 2 directly without pairing.

www.AlloyLED.com

page 5 of 7

.(P1)

P11

(P1)

Change the image for a room:

1. Press the Edit button. (P9)

2. Tap the image of a room. (P10) The camera will open automatically.

3. Take a picture.

4. Click "use photo". (P12)

5. Press the Save button. (P10)

(P10)

For CCT led lighting

For single color LED

lighting

Call: 800.910.LEDS [5337]

Specifications subject to change without notice.

4)Press ok, after around 1 minute, Easylighting will can be found in

network list again.(P7.P8)

Room editing information

1.Short press setting button

2.Short press Edit room information button

there will be room editing page as(P9)

a. Edit room/zone name

1)Press Edit button

2)Click the words("bedroom" for example)

3)Clean the old name and enter a new name ( zone for example)

4)Press save button

b. Change picture for the room

1)Press Edit button

2)Short press the middle of the room picture(P10)

3)Camera will be opened automatically

4)Take a picture

P12

P13

5)Click use photo

Attention

6)Press save button

c. Edit color wheel for corresponding LED lighting

1)Press Edit button

lower right

d. Learning button

2)Cancel the mark for other three color wheels and keep one

Manual for this button will be explained in next chapter.

( take single color as example)

e. back button

3)Press save

After edit, click back button to return setting interface.

4)Choose this zone there will be one directly enter

Select WiFi LED controller(P13)

corresponding color wheel

1.Use direct Easylighting connection with WiFi LED controller. Under this

configure ,only can select one controller

For RGBW LED lighting

RGB / RGB-W

For RGBW LED lighting

2.Connect WiFi LED controller to your home network. Under this configure,

CDW (cool/neutral/

can select all or several pcs .

For CDW LED lighting

warm white)

WiFi setting(P14)

1.Change the password of WiFi controller

Note: Different zones which are assigned different col-

2.Change the SSID name of controller

or wheels cannot be commanded at same time.

Different zones which are assigned the same color

wheel, or are not assigned to any color wheel, can be

selected at the same time.

WiFi Hub Settings (P14)

1. Change the password of WiFi controller

2. Change the SSID name of controller

Second method:

1. Enter Settings and select "Edit Room Information".

2. Press the learning key on the Wireless Receiver.

3. Press the Learning button in the application.

4. Then select the zone/room after that. The LED lights will flash

to indicate successful pairing.

5. Press Save.

Text: 510.400.6690

P10

P11

P10

(P1)

(P9)

(P11)

(P9)

P14

(P12)

(P10)

there will be four different color wheel in

(P10)

CCT (cool/warm white)

For CCT led lighting

For single color LED

single color white

lighting

[email protected]

P12

P11

(P1)