AllPondSolutions SKIM-2 Handmatig - Pagina 5
Blader online of download pdf Handmatig voor {categorie_naam} AllPondSolutions SKIM-2. AllPondSolutions SKIM-2 8 pagina's. Aquarium surface skimmer
Pagina afdrukken
INSTALLATION AND USE
Unbox the SKIM-2 and check all parts are present.
1
Wash the filter floss through until clear with aquarium
2
water and place into the top area of the SKIM-2.
Place the surface strainer inside the top area of the
3
SKIM-2 above the filter floss.
If required, connect the venturi air pipe to the top
4
connector on the outlet.
Position the SKIM-2 inside you aquarium against the
5
aquarium glass using the included suction cup
attachments.
Make sure when positioning the SKIM-2 that the
6
surface strainer is able float up and down with the
surface level.
Insert the SKIM-2 plug into the mains, ensure you
7
have a drip loop present (see image 1).
If required, adjust the surface strainer height using the
8
dial on the front of the SKIM-2 (see image 2).
If you attached the venturi air pipe, adjust the flow of
9
oxygen / bubbles by twisting the venturi adjuster
(see image 3).
image 1
SKIM-2
AQUARIUM
TANK
POWER SUPPLY
CORD
DRIP LOOP
image 2
image 3