Miller Auto-Line XMT 350 OS Gebruikershandleiding - Pagina 23

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Miller Auto-Line XMT 350 OS. Miller Auto-Line XMT 350 OS 36 pagina's.

Power Switch

The fan motor is thermostatically

controlled and only runs when cooling is

needed.

Voltmeter

Ammeter

V/A (Voltage/Amperage) Adjustment

Control

Mode Switch

Mode switch setting determines the process.

SECTION 5 − OPERATION

For Air Carbon Arc (CAC-A) cutting and goug-

ing, place switch in Stick position. For best re-

sults, place Arc Control in the maximum posi-

tion.

Arc Control

Control adjusts Dig when Stick mode is se-

lected on mode switch. When set towards

minimum, short-circuit amperage at low arc

voltage is the same as normal welding

amperage.

When set towards maximum, short-circuit

amperage is increased at low arc voltage to

assist with arc starts as well as reduce stick-

ing while welding.

Select setting best suited for application.

Control adjusts inductance when either

V-Sense Feeder position is selected on the

mode switch. Inductance (0−100%) determ-

ines the "wetness" of the weld puddle. When

set towards maximum, "wetness" (puddle

fluidity) increases.

When the TIG mode is selected, this control

is not functional.

Ref. 803 727-B / Ref. 244 303-A

OM-244 642 Page 19