ABB CPS6000 Snelstarthandleiding - Pagina 5

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} ABB CPS6000. ABB CPS6000 6 pagina's.
Ook voor ABB CPS6000: Snelstarthandleiding (8 pagina's)

Pagina afdrukken

QUICK START GUIDE

Step A1 - Set Shelf Address Jumpers on Bottom Shelf

Step A2 - Mount Shelves per main Step 1

Step A3 - Install Shelf to Shelf Signal Cable

Step A3 - Proceed with installation from main Step 2

•

Specifications and ordering information are in the Slimline Power System Ordering

Brochure available at

•

External Surge Protective Device (SPD) is required on all AC inputs.

Equipment Safety is Approved in IEC 60664-1 Installation Category II environments.

•

Equipment and subassembly ports: 1. are suitable for connection to intra-building or unexposed wiring or cabling;

•

Grounding / Bonding Network – Connect to an Isolated Ground Plane (Isolated Bonding Network) or an Integrated

Ground Plane (Mesh-Bonding Network or Common Bonding Network).

•

Installation Environment - Install in Network Telecommunication Facilities, OSP, or where NEC applies.

•

Battery return may be either Isolated DC return (DC-I) or Common DC return (DC-C).

Reference Documents

These document s are available at

Page 5

2. can be connected to shielded intra-building cabling grounded at both ends.

abbpowerconversion.com