Burkert 2300 Series Extra instructies - Pagina 7

Blader online of download pdf Extra instructies voor {categorie_naam} Burkert 2300 Series. Burkert 2300 Series 12 pagina's. Remote-positioner, installation on process valves with internal air flow
Ook voor Burkert 2300 Series: Gebruiksaanwijzing (12 pagina's), Snelstarthandleiding (19 pagina's)

Pagina afdrukken

Type 8635, Remote-Positioner

Assembling the position sensor

Fastening screws

(2x)

Fig. 9:

Attachment of the position sensor

NOTE!

Observe tightening torque when attaching the position

sensor.

If the fastening screws are tightened too tightly, the degree of

protection IP65 and IP 67 is no longer guaranteed.

▶ Tighten the fastening screws to a maximum tightening

torque of 1.5 Nm.

→ Attach position sensor to the actuator using the two side

fastening screws. Observe maximum tightening torque

of 1.5 Nm.

3.3

Pneumatic connection of the position

sensor

DANGER!

Risk of injury from high pressure and discharge of medium.

▶ Before working on the device or system, switch off the pres-

sure. Vent or drain lines.

Port 1

Port 3:

not used, internally sealed

Fig. 10: Pneumatic connection

english

Port 3