Miller XT30 Gebruikershandleiding - Pagina 26

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Miller XT30. Miller XT30 44 pagina's. Air plasma cutting and gouging
Ook voor Miller XT30: Gebruikershandleiding (40 pagina's)

Pagina afdrukken
Miller XT30 Gebruikershandleiding

1-1. Controls

6-1.
Controls
2
3
1
Output Control
Use control to set cutting output.
If 22-27 amperes of cutting output is used
with 120 VAC input power, and the overload
OM-253555 Page 22
�
Complete Parts List is available at www.MillerWelds.com
A complete Parts List is available at www.MillerWelds.com
SECTION 6 – OPERATION
1
253014-A / Ref. 251808-A
protection on the input power circuit fre-
quently opens, either reduce the cutting out-
put and/or the cut time or find more adequate
power (see Section NO TAG).
2
Power Light
1 Output Control
Use control to set cutting output.
If 22-27 amperes of cutting output is used
with 120 VAC input power, and the overload
protection on the input power circuit fre-
quently opens, either reduce the cutting out-
put and/or the cut time or find more
adequate power (see Section 4-4).
2 Power Light
3 Trouble Lights (See Section 7-7)
4 Power Switch
Use switch to turn unit on or off.
4
3
Trouble Lights (See Section NO TAG)
4
Power Switch
Use switch to turn unit On or Off.
OM-253555 Page 1