Miller XT30 Manuale d'uso - Pagina 26
Sfoglia online o scarica il pdf Manuale d'uso per Sistema di saldatura Miller XT30. Miller XT30 44. Air plasma cutting and gouging
Anche per Miller XT30: Manuale d'uso (40 pagine)
Stampa la pagina
1-1. Controls
6-1.
Controls
2
3
1
Output Control
Use control to set cutting output.
If 22-27 amperes of cutting output is used
with 120 VAC input power, and the overload
OM-253555 Page 22
�
Complete Parts List is available at www.MillerWelds.com
A complete Parts List is available at www.MillerWelds.com
SECTION 6 – OPERATION
1
253014-A / Ref. 251808-A
protection on the input power circuit fre-
quently opens, either reduce the cutting out-
put and/or the cut time or find more adequate
power (see Section NO TAG).
2
Power Light
1 Output Control
Use control to set cutting output.
If 22-27 amperes of cutting output is used
with 120 VAC input power, and the overload
protection on the input power circuit fre-
quently opens, either reduce the cutting out-
put and/or the cut time or find more
adequate power (see Section 4-4).
2 Power Light
3 Trouble Lights (See Section 7-7)
4 Power Switch
Use switch to turn unit on or off.
4
3
Trouble Lights (See Section NO TAG)
4
Power Switch
Use switch to turn unit On or Off.
OM-253555 Page 1