Miller Cool Belt Gebruikershandleiding - Pagina 14

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Miller Cool Belt. Miller Cool Belt 22 pagina's. Auto-darkening helmets helmet cooling system

Pagina afdrukken

1. Helmet Cooling System Specifications

3-8. Checking The Helmet Cooling System Before Use

Read

and

these

instructions

and the safety labels

carefully.

product is intended

for use as a cooling

device only. It is not a

respiratory

tive device and does

not protect the user

from airborne con-

taminants. Have an

industrial

hygienist

test the air in your fa-

cility to determine if

respiratory

tion is required to

provide

adequate

protection from con-

taminants in your en-

vironment. With cool-

ing system-equipped

helmet on your head

and cooling system

operating, also test

the air inside the hel-

met to determine if

respiratory

tion is required. If you

have questions about

the type of respirato-

ry protection equip-

ment required, con-

sult your safety direc-

tor and an Industrial

Hygienist.

OM-235 368 Page 12

Do not restrict or alter

helmet cooling sys-

tem air flow. Be sure

safety glasses, hair,

This

weld cap, and other

objects do not block

air flow.

protec-

Before using the helmet

cooling system, check the

following items:

Filter And Spark

Guard (Section 3-5)

protec-

Filter is required for

proper operation

equipment, but does

not provide respiratory

protection.

Verify the filter and spark

guard

properly assembled, and

securely connected to the

blower assembly.

protec-

Flexible Hose (Section

3-6)

Be sure the hose is undam-

aged and properly con-

nected to the blower as-

sembly and shroud.

are

undamaged,

Battery (Sections 3-3

And 3-4)

Verify the battery is fully

charged and securely in-

stalled in the blower assem-

bly.

Air Flow (Section 3-7)

Turn on blower assembly

and test air flow at low and

high speeds.

Shroud (Section 3-2)

Inspect the shroud and re-

place if damaged. See

Troubleshooting (Section

3-13) if air is not being sup-

plied to front of helmet.

Put on helmet and adjust

helmet so helmet fits snugly

on head. Verify shroud is

properly installed on hel-

met.

See the welding helmet

Owner's Manual for

helmet adjustment in-

formation.

Fabric Shroud

(Section 3-2)

Inspect the shroud and re-

place if damaged. See

Troubleshooting (Section

3-13) if air is not being sup-

plied to shroud.