Miller Cool Belt Посібник користувача - Сторінка 14

Переглянути онлайн або завантажити pdf Посібник користувача для Аксесуари для мотоциклів Miller Cool Belt. Miller Cool Belt 22 сторінки. Auto-darkening helmets helmet cooling system

Miller Cool Belt Посібник користувача

3-8. Checking The Helmet Cooling System Before Use

.
Read
and
these
instructions
and the safety labels
carefully.
product is intended
for use as a cooling
device only. It is not a
respiratory
tive device and does
not protect the user
from airborne con-
taminants. Have an
industrial
hygienist
test the air in your fa-
cility to determine if
respiratory
tion is required to
provide
adequate
protection from con-
taminants in your en-
vironment. With cool-
ing system-equipped
helmet on your head
and cooling system
operating, also test
the air inside the hel-
met to determine if
respiratory
tion is required. If you
have questions about
the type of respirato-
ry protection equip-
ment required, con-
sult your safety direc-
tor and an Industrial
Hygienist.
OM-235 368 Page 12
.
follow
Do not restrict or alter
helmet cooling sys-
tem air flow. Be sure
safety glasses, hair,
This
weld cap, and other
objects do not block
air flow.
protec-
Before using the helmet
cooling system, check the
following items:
1
Filter And Spark
Guard (Section 3-5)
protec-
.
Filter is required for
proper operation
equipment, but does
not provide respiratory
protection.
Verify the filter and spark
guard
properly assembled, and
securely connected to the
blower assembly.
protec-
2
Flexible Hose (Section
3-6)
Be sure the hose is undam-
aged and properly con-
nected to the blower as-
sembly and shroud.
of
are
undamaged,
3
Battery (Sections 3-3
And 3-4)
Verify the battery is fully
charged and securely in-
stalled in the blower assem-
bly.
4
Air Flow (Section 3-7)
Turn on blower assembly
and test air flow at low and
high speeds.
5
Shroud (Section 3-2)
Inspect the shroud and re-
place if damaged. See
Troubleshooting (Section
3-13) if air is not being sup-
plied to front of helmet.
Put on helmet and adjust
helmet so helmet fits snugly
on head. Verify shroud is
properly installed on hel-
met.
.
See the welding helmet
Owner's Manual for
helmet adjustment in-
formation.
6
Fabric Shroud
(Section 3-2)
Inspect the shroud and re-
place if damaged. See
Troubleshooting (Section
3-13) if air is not being sup-
plied to shroud.