Miller Titanium Series Handmatig - Pagina 9

Blader online of download pdf Handmatig voor {categorie_naam} Miller Titanium Series. Miller Titanium Series 40 pagina's. Auto-darkening w/infotrack
Ook voor Miller Titanium Series: Gebruiksaanwijzing (32 pagina's)

Pagina afdrukken

3-3. Auto On/Off Button And Grind Mode / Low Battery Light

(Titanium 7300 And 9400 Series Helmets)

The auto-darkening lens

on Titanium 7300 and

9400 Series Helmets

turns on (darkens) auto-

matically when welding

begins and turns off

when welding stops.

Auto On/Off Button

Press Auto On/Off button to

check if the lens is working

properly and to begin Mode

and Info adjustments.

When the On/Off button is

pressed, the lens should

darken and return to the

clear state. Do not use the

helmet if the lens does not

function as described. (See

Section 10, Troubleshoot-

ing.)

Grind / Low Battery Light

The Grind / Low Battery light

blinks when the lens is in the

Grind mode. Light stays on

when 2−3 days of battery life

remain.

If battery power is low, re-

place with CR2450 lithium

batteries (2 required − Miller

Part No. 217 043). See Sec-

tion 7.

OM-256 016 Page 7