Miller Titanium Series Manuel - Sayfa 9

Motosiklet Aksesuarları Miller Titanium Series için çevrimiçi göz atın veya pdf Manuel indirin. Miller Titanium Series 40 sayfaları. Auto-darkening w/infotrack
Ayrıca Miller Titanium Series için: Kullanım Talimatı (32 sayfalar)

Miller Titanium Series Manuel
3-3. Auto On/Off Button And Grind Mode / Low Battery Light

(Titanium 7300 And 9400 Series Helmets)

1
.
The auto-darkening lens
on Titanium 7300 and
9400 Series Helmets
turns on (darkens) auto-
matically when welding
begins and turns off
when welding stops.
1
Auto On/Off Button
Press Auto On/Off button to
check if the lens is working
properly and to begin Mode
and Info adjustments.
When the On/Off button is
pressed, the lens should
darken and return to the
clear state. Do not use the
helmet if the lens does not
function as described. (See
Section 10, Troubleshoot-
ing.)
2
Grind / Low Battery Light
2
The Grind / Low Battery light
blinks when the lens is in the
Grind mode. Light stays on
when 2−3 days of battery life
remain.
If battery power is low, re-
place with CR2450 lithium
batteries (2 required − Miller
Part No. 217 043). See Sec-
tion 7.
OM-256 016 Page 7