AquaPurr eC Gebruikershandleiding - Pagina 6

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} AquaPurr eC. AquaPurr eC 12 pagina's.
Ook voor AquaPurr eC: Handmatig (4 pagina's)

Pagina afdrukken
Installation Instructions
6) Peel the backing off the 3M
Command strips located on the
bottom of the AquaPurr eC.
Position the AquaPurr eC next
to the sink and press down on
the top edges of the AquaPurr
eC base unit to secure the
Command strips to your counter.
7) Install the rigid plastic drinking
spigot.
Confirm the installation is
secured by slightly pulling the
spigot—it should not pull out.
You may need to push a bit
harder than you think to secure
the spigot. You will know it is
not fully inserted if you see
some water come from that joint
when you turn on the faucet.
To remove the spigot, simply
push down and hold the blue
ring on the fitting while pulling
out the spigot.
8) Rotate the top half of the
AquaPurr eC base unit as
needed to position the plastic
drinking spigot over your sink.
AquaPurr eC
The 3M Command strips act like Velcro to
secure the AquaPurr eC to your counter top.
The 3M Command strips allow you to remove
and reposition the AquaPurr eC.
Use of the 3M Command strips is highly
recommended to help prevent your cat from
moving the AquaPurr eC away from the sink,
which could potentially cause the flowing
water to land outside the sink.
Simply push the end of the spigot into the top
of the fitting on the base unit.
The AquaPurr eC can be placed on either
side of your sink. Just rotate the top half of
the base unit as needed so that the drinking
spigot is positioned over your sink.
Excessive rotating of the base unit top may
kink the flexible tubing inside the unit, which
could restrict water flow from the AquaPurr
eC. If you suspect that is happening, just pull
the two halves of the AquaPurr eC base unit
apart and rearrange the tubing as needed.
Page 5 of 11