AQUARAY GROBEAM Handleiding voor installatie en gebruik - Pagina 4

Blader online of download pdf Handleiding voor installatie en gebruik voor {categorie_naam} AQUARAY GROBEAM. AQUARAY GROBEAM 6 pagina's. Solid state lighting systems

Pagina afdrukken

B. Without any fixtures, by resting the quaBeam/GroBeam lamp unit

on the specially designed front lens face for installation ON TOP of a

transparent cover glass or plastic condensation tray.

Using the screws provided (blackened or nylon) to thread directly

into the back of the quaBeam/GroBeam unit.

Please note: the

nylon screws can

be cut to length to

suit your needs.

QU BE M/GROBE M LIGHTING TILE

. Using the quaBeam/GroBeam brackets (supplied) for more

permanent attachment with six screws (stainless steel self tap, or

nylon nut and bolt – all supplied) to the INSIDE or UNDERSIDE

of a wooden or metal hood or other enclosure.

Caution: Before the brackets have been attached to the wooden or metal

hood or other enclosure using all six screws, make sure that they are fully

pushed onto the metal rail of the heat sink.

Caution: To securely attach the bracket to the wooden or metal hood or

other enclosure, all six screws must be used.

B. Without any fixtures, by resting the quaBeam/GroBeam lamp

unit on the specially designed front lens face for installation ON

TOP of a transparent cover glass or plastic condensation tray.

Further mounting options are available. Please refer to the AquaRay Modular

Mounting System leaflet included with this unit. For other tips and answers to

some frequently asked questions visit:- www.tropicalmarinecentre.co.uk

and click on "Aquarium Products" - "Lighting" - "AquaRay FAQs".

OPER TION

Once mounted above the aquarium according to one of the recommended

installation methods detailed above, the lamp unit(s) may be connected to the

power supply unit (PSU) and then the PSU connected to the mains using the

power cord supplied, and switched on. The lamp unit must not be connected to,

or used with, any PSU other than that supplied by Tropical Marine Centre.

The PSU may be connected to the mains via a suitable 24 hour timer device

(not supplied) to regulate when the lamp unit is switched on or off. The PSU

may also be connected to an AquaRay Control unit (available separately) to

simulate sunrise, sunset and moonlight.

Caution: Do not attempt to control or regulate in any way the DC supply

from the PSU to the AquaRay lamp unit. Any attempt to do so may invalidate

the 5 year guarantee on your AquaRay lamp unit.