AQUARAY GROBEAM Manual de instruções de instalação e utilização - Página 4

Procurar online ou descarregar pdf Manual de instruções de instalação e utilização para Equipamento de iluminação AQUARAY GROBEAM. AQUARAY GROBEAM 6 páginas. Solid state lighting systems

B. Without any fixtures, by resting the quaBeam/GroBeam lamp unit
on the specially designed front lens face for installation ON TOP of a
transparent cover glass or plastic condensation tray.
C.
Using the screws provided (blackened or nylon) to thread directly
into the back of the quaBeam/GroBeam unit.
Please note: the
nylon screws can
be cut to length to
suit your needs.
2.
QU BE M/GROBE M LIGHTING TILE
. Using the quaBeam/GroBeam brackets (supplied) for more
permanent attachment with six screws (stainless steel self tap, or
nylon nut and bolt – all supplied) to the INSIDE or UNDERSIDE
of a wooden or metal hood or other enclosure.
Caution: Before the brackets have been attached to the wooden or metal
hood or other enclosure using all six screws, make sure that they are fully
pushed onto the metal rail of the heat sink.
Caution: To securely attach the bracket to the wooden or metal hood or
other enclosure, all six screws must be used.
B. Without any fixtures, by resting the quaBeam/GroBeam lamp
unit on the specially designed front lens face for installation ON
TOP of a transparent cover glass or plastic condensation tray.
Further mounting options are available. Please refer to the AquaRay Modular
Mounting System leaflet included with this unit. For other tips and answers to
some frequently asked questions visit:- www.tropicalmarinecentre.co.uk
and click on "Aquarium Products" - "Lighting" - "AquaRay FAQs".
OPER TION
Once mounted above the aquarium according to one of the recommended
installation methods detailed above, the lamp unit(s) may be connected to the
power supply unit (PSU) and then the PSU connected to the mains using the
power cord supplied, and switched on. The lamp unit must not be connected to,
or used with, any PSU other than that supplied by Tropical Marine Centre.
The PSU may be connected to the mains via a suitable 24 hour timer device
(not supplied) to regulate when the lamp unit is switched on or off. The PSU
may also be connected to an AquaRay Control unit (available separately) to
simulate sunrise, sunset and moonlight.
Caution: Do not attempt to control or regulate in any way the DC supply
from the PSU to the AquaRay lamp unit. Any attempt to do so may invalidate
the 5 year guarantee on your AquaRay lamp unit.
3