Diamond RF2G/Q Handmatig - Pagina 5
Blader online of download pdf Handmatig voor {categorie_naam} Diamond RF2G/Q. Diamond RF2G/Q 10 pagina's.
Ook voor Diamond RF2G/Q: Gebruikers- en installatiehandleiding (10 pagina's)
Pagina afdrukken3. CONFORMITY OF USE
Use the device only to cook or keep warm some food.
4. OPERATING MODE
These gas stoves are compact stainless steel appliances with 1, 2 or 3
burners depending on the model.
The control of the cooking zones is independent, with a piezo ignition system
and a safety thermocouple.
They are equipped with several fully removable parts: cast iron grill, burner
crown and stainless steel tray.
To turn on your stove, simply push and turn the tap knob (n°1 in the photo) to
the left to the large flame position and press the piezo knob (n°2 in the photo).
Hold the knob for 15 seconds so that the burner remains lit.
During cooking, the temperature can be regulated with the control knob (n°1 in
the photo) from high flame to low flame (to avoid the phenomenon of
overcooking).
A safety thermocouple cuts off the gas supply if the burner goes out. The
reduced flow rate of the appliance is preset at the factory. It must not be
changed.
5. OPERATION / HANDLING
a) Installation/Assembly:
- Carefully unpack the machine from its carton.
- Place the appliance on a flat, heat-resistant surface in a well-ventilated room.
- Never place the machine near a wall or partition made of combustible
materials, even if it is very well insulated.
- A distance of at least 10 cm from the wall or partition is required.
- Remove the white protective film around the machine.
b) First use:
For the first use, heat your stove outside in order to evacuate the residual oil
fumes from the metal parts. This may give off a slight odour for a few moments.
First cleaning
Clean the device before the first use. (See 6 Cleaning)
12
G03407
December 2020